Pinpointe Web Analysis


Clean Room Conveyors | Flat | Incline | Adjustable Angle

Clean Room Conveyors, Adjustable Angle Model ACRK

Clean Room Adjustable Angle Belt Conveyor

An adjustable angle of 20°–45°, makes the ACRK perfect for under the press, along side the press or for moving parts to a trunkline, work station or automatic box filling system. Horizontal to inclined transition rollers eliminate pinch points and assure smooth part transfer. Angles and leg sets are easy to adjust.

Lengths: 5' to 15' in 1ft increments
Widths: 6", 9", 12", 18", 24", 30"


Specifications:

  • Aluminum framing and stainless steel guarding and legs resist corrosion and eliminate paint chip contamination
  • A USDA/FDA approved belt
  • An open-construction slide bed with UHMW contact strips eliminates places where abrasive debris can collect
  • Direct Drive motor replaces leak-prone, chain-driven systems
  • Double V-guided, FDA approved, white PVC belt.
  • Sealed bearings reduce the possibility of lubricant leaks
  • Units up to 10' length ship fully assembled

  • Available Options:

  • Stainless steel framing
  • Sealed belt edges to minimize dust from belt fraying
  • Non-fraying Intralox plastic belting eliminates friction contamination and is fast and easy to clean
  • Wash-down compliant electrics
  • USDA/FDA approved Delrin® rail lining to keep parts from touching the metal side rails
  • Maintenance-free, grease-lubricated gearbox to prevent leak contamination
  • Deionizing blowers to eliminate static electricity and prevent particulates from sticking to molded parts
  • Catch trays to prevent particulates from escaping into the environment

  • Two Ways to Order:

    1. Download Conveyor Calculations Sheet pdf

  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Fax to 216-535-4823. For questions call 216-535-4848
  • 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

  • The conveyor model
  • The belt width
  • The conveyor length (in feet)
  • Belt speed standard 20FPM (40FPM, 80FPM variable speed also available)
  • The conveyor infeed belt height and the discharge belt height you want.
  • Note: Additional widths, lengths, belt speeds, etc. are available.
  • Standard Models (6", 9", 12", 18" widths) The “A” dimension infeed length minimum is 2.5', maximum 7.5'. The “B” dimension discharge length minimum is 2.5'. A + B cannot exceed 15'. The motor is located at the discharge.
    24" & 30" wide Models The “A” dimension infeed length minimum is 2.5', maximum 7.5'. The “B” dimension discharge length minimum is 2.5'. A + B cannot exceed 15'. The motor is located at the infeed.

    BW = Belt width
    ⚫ = Standard starter position (specify if other location)
    ☀ = Starter position for 8' or shorter conveyors
    ◪ = Drive location for 24" & 30" models is mounted on the infeed end
    Drive location for 9", 12", and 18" models is mounted on discharge end 11" min. infeed belt height w/standard legs and castors
    Horsepower determination charts pdf | Leg location and leg count charts pdf

    Clean Room Adjustable Angle Dimensions