Pinpointe Web Analysis


Kurv King Conveyors | Adjustable Angle | Fixed Angle

Fixed Angle, Flat to Incline Model KK

Kurv King Fixed Angle Belt Conveyor

Versatile, fixed angle KK conveyors are ideal for use under or along side the press, for feeding trunkline conveyors, boxfilling systems, turntable work stations, etc. EMI, exclusive horizontal to incline transition eliminates pinch points and assures smooth part transfer.

Lengths: to 15'
Belt Widths: 6", 9", 12", 18", 24", 30"

Specifications:

  • Available with 15°, 30° or 45° discharge angle
  • Direct Drive 1/3 hp 110/60/1 C-Faced drive package (80FPM uses 1/2 hp Drive Pak)
  • No roller chain or sprockets
  • Sealed gear reducer
  • 12-gauge steel frame construction
  • 50 lbs. maximum load
  • Double V-guided, FDA approved, white PVC belt with 1 1/2" high flexible cleats on 18" centers
  • 4" high side rails lapped over the conveyor belt with Lexan infeed flapper
  • Bottom slide tray protects cleats
  • Leg sets and swivel castors included
  • 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
  • Control wiring contained in liquid-tight conduit and connectors
  • Units up to 10' length ship fully assembled
  • Available Options
  • Quick Ship Logo
    Ask about QuickShip availability when ordering.


    Two Ways to Order:

    1. Download Conveyor Calculations Sheet pdf.

  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Submit by Email or Fax to 216-535-4823.
  • 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

  • The conveyor model
  • The belt width
  • Determine the infeed and discharge lengths (in feet): For 6", 9", 12", and 18" belt width Models, the motor is located at the discharge. The “A” dimension infeed length minimum is 1', max is 7'. The “B” dimension discharge length minimum is 2'. A + B can not exceed 15'.
    For 24" and 30" wide Models, the motor is located at the infeed. The “B” dimension discharge length minimum is 2', max is 7'. The “A” dimension infeed length minimum is 1'. A + B can not exceed 15'.
  • Belt speeds: 20, 40, or 80FPM
  • The conveyor infeed belt height
  • Note: Additional widths, lengths, belt speeds, etc. are available
  • BW = Belt width.
    ⚫ = Standard starter position (specify if other location).
    ☀ = Starter position for 8' or shorter conveyors.
    ◪ = Drive will be mounted on the infeed for 24" and 30" wide models
    2' and 3' “B” dimension = 20 to 45° angle adjustment.
    4' and 6' “B” dimension = 12 to 45° angle adjustment.
    Horsepower determination charts pdf | Leg location and leg count charts pdf

    Kurv King Fixed Angle Conveyor Dimensions