Pinpointe Web Analysis


Merit Line Conveyors | Flat | Incline | Adjustable Angle | Z-belt

Merit Line Conveyors, Adjustable Angle Models ADK & DDK

Merit Line Adjustable Angle Belt Conveyor

An adjustable angle of 20°–45°, makes this Adjustable Angle conveyor perfect for under the press, along side the press or for moving parts to a trunkline, work station or automatic box filling system. Horizontal to inclined transition rollers eliminate pinch points and assure smooth part transfer. Angles and leg sets are easy to adjust.

Lengths: 5' to 15'
Belt Widths: 6", 9", 12", 18", 24", 30"

Specifications:

  • Angle adjustment 20° to 45°
  • Direct Drive 1/3 hp 110/60/1 C-Faced drive package (80 fpm uses 1/2 hp Drive Pak)
  • No roller chain or sprockets
  • Sealed gear reducer
  • Available with Aluminum or Steel Frame
  • 50 lbs. maximum load
  • 1/8" anodized aluminum sheet
  • Double V-guided, FDA approved, white PVC belt with 1.5" flexible cleats on 18" centers
  • Belt speed: 20FPM
  • 4" high side rails, lapped over conveyor belt
  • Leg sets and swivel castors included
  • 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
  • Control wiring contained in liquid-tight conduit and connectors
  • All units ship fully assembled
  • Available Options
  • Quick Ship Logo
    Ask about QuickShip availability when ordering.

    Two Ways to Order:

    1. Download Conveyor Calculations Sheet pdf.

  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Submit by Email or Fax to 216-535-4823.
  • 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

  • The conveyor model
  • The belt width
  • The conveyor infeed length (in feet). Minimum length 2.5'
  • The discharge length (in feet). Minimum length 2.5'
  • Belt speed standard 20FPM (40, and 80FPM and variable speed also available)
  • Note: Additional widths, lengths, belt speeds, etc. are available.
  • Standard Models (6", 9", 12", 18" widths) The “A” dimension infeed length minimum is 2.5', maximum 7.5'. The “B” dimension discharge length minimum is 2.5'. A + B can not exceed 15'. The motor is located at the discharge.
    24" & 30" wide Models The “A” dimension infeed length minimum is 2.5', maximum 7.5'. The “B” dimension discharge length minimum is 2.5'. A + B can not exceed 15'. The motor is located at the infeed.

    BW = Belt width.
    ⚫ = Standard starter position (specify if other location).
    ☀ = Starter position for 8' or shorter conveyors.
    ◪ = Drive location for 24" & 30" models is mounted on the infeed end
    Drive location for 9", 12", and 18" models is mounted on discharge end. 11" min. infeed belt height w/standard legs and castors
    Horsepower determination charts pdf | Leg location and leg count charts pdf.

    Merit Line Adjustable Angle Dimensions