Pinpointe Web Analysis

Signature Line Steel Frame Conveyors

Signature Line steel frame conveyors give you a cost-effective way to build an automation system — these strong, heavy-duty conveyors can meet your requirements today and be adapted to your future needs.




Main Features:

  • Steel frame for maximum heavy-duty industrial wear
  • Direct Drive Package: The motor and SEALED GEAR REDUCER attach directly to the pulley shaft, minimizing maintance.
  • No roller chain or sprockets to align
  • 150 lbs. maximum load
  • Leg Sets and Castors included
  • Double V-Guide Belt Tracking: Provides exceptionally stable belt tracking, which significantly extends belt life.
    Guides are on the sides rather than the middle make it easier to track the belt.

  • Specifications:

    1. Drive Package: The Direct Drive package includes a C-faced, TEFC 1/3 hp motor. Motors through 1 Hp are 110/60/1 voltage and come with a thermal protected toggle switch motor starter in a NEMA 1 enclosure. 15' of SJ cord with a standard three-prong plug is pre-wired to the starter (other voltage and motor starters available). Control wiring is contained in liquid tight conduit and connectors. Drive packages for conveyors 3'–30' long have 150 lbs. maximum load (drive packages for heavier loads are available). NOTE: We do not recommend running the motor at less than 1/3 of the overall output (speed), as this could result in lowering the life expectancy of the motor. If you are planning on running at less than 1/3 of the output, please consult an EMI Representative.

    2. Belt Guidance: True Track Belt Guidance System comes standard on 3'–30' long conveyors. Using a Double V-guide slot in the frame, 1/4" wall crowned pulleys, and bonded Double V-guide belting, “True Track” minimizes belt run off and reduces belt tracking maintenance.

    3. Pulleys: To ensure long lived operation, 3.5" diameter crowned pulleys incorporate 1" diameter shafts, self aligning sealed ball bearings with eccentric locking collars, telescopic take-up adjustment, position locking nuts, and Zerk grease fittings.

    4. Belting: Our easy to clean, FDA approved, white, PVC belting with staple-type belt lacing (which prevents lacing pullout and splice failure), makes belt maintenance quick and easy. Inclined conveyors have a bottom cleat support plate and bonded flexible cleats that have no bolts or rivets that may tear out.

    5. Frame: Our sturdy, reinforced, welded, cross-braced steel frames, painted OSHA orange (other colors are available) incorporate 12-gauge channels with a 16-gauge slide bed to minimize twist and camber, and provide longer service life.

    6. Rails: To ensure molded pieces do not get pinched, damaged, or lost between the rail and belt, we place our 12-gauge 4" rails so that they overlap the belt. To keep your molded parts contained on the infeed end of the conveyor, we include an infeed-end backpiece.

    7. Shipment: Generally conveyors 3'–10' are shipped fully assembled, pre-wired, tested, and ready to run (legs must be attached). Conveyors 11' and over are shipped partially assembled to minimize shipping damage. Some frame and belt assembly is required; drive packages and system panels are pre-assembled and tested. For your convenience, arrangements can be made for longer conveyors to be shipped assembled.

    8. Leg Sets: Adjustable leg sets and locking swivel castors are standard (not included) on RM and RMC conveyors. Belt height must be specified.