Pinpointe Web Analysis


Trim Line Conveyors | Flat | Incline | Adjustable Angle

Trim Line Conveyors, Adjustable Angle Models ATLK & STLK

Trim Line Adjustable Angle Conveyor

An adjustable angle of 20–45° makes the Trim Line Adjustable Angle Conveyor perfect for under or along side the press or for moving parts to a truckline, work station, or automatic box filling system. Transition rollers eliminate pinch points and assure smooth part transfer.

Lengths: up to 15'
Belt Widths: 6", 9", 12", 18", 24"

Specifications:

  • Direct Drive 1/4 hp 90V DC Variable-speed drive package
  • No roller chain or sprockets
  • Sealed gear reducer
  • 50 lbs. maximum load
  • Adjustable angle incline 20–45°
  • Double V-guided, FDA approved, white PVC belt with 1.5" high cleats on 18" centers
  • 4" high side rails, lapped over conveyor belt
  • Leg sets and swivel castors included. Legs are adjustable up to 34" infeed belt height
  • 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
  • Control wiring contained in liquid-tight conduit and connectors
  • Units up to 10' length ship fully assembled
  • Available Options
  • Quick Ship Logo
    Ask about QuickShip availability when ordering.


    Two Ways to Order:

    1. Download Conveyor Calculations Sheet pdf.

  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Submit by Email or Fax to 216-535-4823.
  • 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

  • The conveyor model
  • The belt width
  • The conveyor infeed length (in feet). Minimum length 2'
  • The discharge length (in feet). Minimum length 2'
  • Belt speed standard 20FPM (40FPM, 60FPM variable speed also available)
  • Note: Additional widths, lengths, belt speeds, etc. are available

  • Standard Models (6", 9", 12", 18" widths) The “A” dimension infeed length minimum is 2', maximum 7'. The “B” dimension discharge length minimum is 2'. A + B can not exceed 15'. The motor is located at the discharge.
    24" wide Models The “A” dimension infeed length minimum is 2', maximum 7'. The “B” dimension discharge length minimum is 2. A + B can not exceed 15'. The motor is located at the infeed.

    BW = Belt width.
    ⚫ = Standard starter position (specify if other location).
    ☀ = Starter position for 8' or shorter conveyors.
    ◪ = Drive location for 24" & 30" models is mounted on the infeed end
    Drive location for 9", 12", and 18" models is mounted on discharge end. 11" min. infeed belt height w/standard legs and castors
    Horsepower determination charts pdf | Leg location and leg count charts pdf.

    Trim Line Conveyor Dimensions