Pinpointe Web Analysis


Trim Line Conveyors | Flat | Incline | Adjustable Angle

Trim Line Conveyors, Flat Belt Models ATL & STL

Trim Line Flat Belt Conveyor

These conveyors are perfect for under the press, along side the press, robotic applications, box filling systems—or anywhere a sturdy, industrial-use, low-maintenance, long-lasting conveyor is needed.

Lengths: 3' to 20' in 1ft increments
Belt Widths: 4", 6", 9", 12", 18", 24"

Specifications:

  • Direct Drive 1/4 hp 90V DC Variable-speed drive package
  • No roller chain or sprockets
  • Sealed gear reducer
  • 50 lbs. maximum load
  • Double V-guided, FDA approved, white PVC belt
  • 2" high side rails, lapped over conveyor belt
  • Leg sets (Adjustable up to 34" belt height) and swivel castors included
  • 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
  • Control wiring contained in liquid-tight conduit and connectors
  • Units up to 10' length ship fully assembled
  • Available Options
  • Quick Ship Logo
    Ask about QuickShip availability when ordering.


    Two Ways to Order:

    1. Download Conveyor Calculations Sheet pdf.

  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Submit by Email or Fax to 216-535-4823.
  • 2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

  • The conveyor model
  • The belt width
  • The conveyor length (in feet)
  • Belt speed standard 20FPM (40FPM, 60FPM variable speed also available)
  • The conveyor infeed belt height and the discharge belt height you want.
  • Note: Additional widths, lengths, belt speeds, etc. are available

  • BW = Belt width.
    ⚫ = Standard starter position (specify if other location).
    ☀ = Starter position for 8' or shorter conveyors.
    Horsepower determination charts pdf | Leg location and leg count charts pdf

    Trim Line Conveyor Dimensions

    Indexing Control Option

    The EMI indexing option S-44-Pro, is a 110/1/60 VAC, NEMA 1, electrical control system, designed to index a conveyor when a 24VDC or dry contact index signal is sent. This system includes: Robotic Indexing Control

  • A NEMA 1 enclosure
  • A control relay with a timing module.
  • A twist lock plug and receptacle mounted on cord to connect the ProLumina conveyor to control enclosure.
  • A twist lock plug and receptacle to connect the 24V DC index signal to the control enclosure.
  • To install the S-44-Pro, simply replace the existing conveyor plug with a twist lock plug. Once the plug has been replaced, the conveyor is ready to be plugged directly into the control. This reduces set up times by eliminating the need to hardwire, drill holes in the box, etc. Even existing Trimline conveyors can easily be field retrofitted with the S-44-Pro indexing control should the need arise. In addition to providing a simplified means of adding indexing to a robotic or box filling application, the unit also provides a great deal of flexibility for short runs or when indexing may be needed on different machines at different times. Price: $456.00