7446 Sprue Pusher for Gimatic PB Sprue Grippers, For use with OFC14 Cylinders

These Gimatic Mini Cylinders are comparable to the square body cylinders with the added advantage of being clampable and easily adjustable, which allows a wide range of mounting configurations. The lightweight and compact aluminum body is available in 14mm, 20mm, and 30mm diameters. The non-rotating M3 & M4 female threaded rod allows the use of common mini-cylinder grip pads.

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Simple, easy sensing. A sensor mounted on the finger confirms sprue gripped and eliminates the "hide and seek" process of sensor set-up.

• The steel jaw trigger is long lasting and has a high temperature range.
• This gripper has a higher grip force than other similarly sized sprue grippers.
• Serrated fingers hold small and medium sprues firmly.

• Interlaced and serrated steel fingers hold small and medium sprues firmly.
• Higher grip force than other similarly sized sprue grippers.
• ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.

• Simple, easy sensing. A single sensor mounted on the finger confirms sprue gripped and eliminates the "hide and seek" process of sensor set-up.
• Higher grip force than other similarly sized sprue grippers.
• Jaws made of Hardened Steel