EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
8000 Custom 3D Printed Vacuum Kit For Collaborative Robots
The 3D-V Vacuum Kit by EMI is a 3D printed EOAT that can be made to meet your specific handling needs. All 3D-V kits can have up to 16 vacuum cups within a 375mm x 275mm footprint. EMI can provide the ideal tool to you that is both lightweight and smart with an integrated sensing module.
The Kit is easy to install and operate. Connect your 6mm compressed air line, a 4-wire cable to the controller box, install our URCap, and your Pneumatic 3D-V Vacuum Kit is ready to expand the capabilities of your Collaborative Industrial Robot.
Features:
- Certified by Universal Robots
- Compatible with OnRobot VGC10
- Fully Customizable: (1–16) vacuum cups with variable spacing.
- Select the ideal vacuum cup for your application: High Temperature, Non-Marking Hithane, Dual Durometer for textured parts, Anti-Static, and many other options. Check out our Vacuum Cup Section.
- Integrated Vacuum Generator with a monitoring switch for part confirmation.
- Internal manifold inside the core of the frame to reduce hazards from tubing.
- Lightweight 3D printed frame made out of durable nylon.
Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).
EMI's Solenoid Valve Kit for Collaborative Robots is an essential add-on for all pneumatic applications. This powerful 5-port/2-position valve enables you to actuate Single Acting (NO/NC) and Double Acting end effectors while using a single Digital Output and compressed air line.
Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.
With the same convenience as the conventional vacuum filters (the VFU series), this filter can be used in the positive pressure as well.
The Vacuum Generator Kit for Cobots by EMI operates off of a 24Vdc, mono-stable signal and is the ideal solution for vacuum EOAT. With an incorporated teachable vacuum switch, 3D printed housing and anti-slip straps, the VGK is a true plug and play solution for your cobot. Contact our Engineering department if you would like to discuss a custom Vacuum EOAT solution.
Built into every OnRobot gripper, the EOAT Side Quick Changer is now available for all EOAT which makes it easy to click into your cobot. With a 20kg payload, this quick changer is a simple way to swap your EOAT in between applications.
With a 33lbs payload, dual vacuum channels, and a built-in Quick Changer, the VGC10 is the next level of Vacuum EOAT for Cobots. Coupled with EMI’s EOAT framing, vacuum cups selection, 3D print capabilities and Engineering services, OnRobot’s VGC10 is a powerful Vacuum EOAT solution.
With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production. This tool changer kit has everything you need to get started.
With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production.
With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production.
The Dual Quick Changer enables you to use two end-of-arm tools together in a single cycle. With this innovative solution you can use two grippers or vacuum units. Quickly and seamlessly switch between tools to maximize the utilization of your robots.
This has been replaced with OR-109878, see Related Items below.
Gen III SmartShift with a vacuum EOAT that requires electrical connection, pneumatics and a vacuum-actuated soft gripper. Tool pockets and framing can be built around your specific application.
SmartShift automatic tool changers feature a clutch-driven engagement that enables mechanical, pneumatic and optional electric connections. No need for compressed air or electricity for coupling, and available as a kit or a la carte, in two different payload capacities. Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.
Gen III SmartShift with a vacuum EOAT that requires electrical connection, pneumatics and a vacuum-actuated soft gripper. Tool pockets and framing can be built around your specific application.
SmartShift automatic tool changers feature a clutch-driven engagement that enables mechanical, pneumatic and optional electric connections. No need for compressed air or electricity for coupling, and available as a kit or a la carte, in two different payload capacities. Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.
SmartShift HD63: Higher payload and added safety features!
The HD63 version uses the same principle as the standard (Gen III) SmartShift and even uses the same pneumatic and electrical accessories. Here are a few features that set it apart and make it suitable for higher payload applications.
Automatic Tool Changers require some level of added integration, and we encourage you to partner with our EOAT Engineers to ensure a seamless implementation.