Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Soft Grippers  > 8080 piSOFTGRIP® Gripper with 3 silicone fingers

8080 piSOFTGRIP® Gripper with 3 silicone fingers (size 50)

Item #:CRG PSG 3S G18M 
Available: In Stock

Cost effective, simple and robust. This silicone gripper is ideal for sensitive and lightweight object handling and includes a Male G1/8 Fitting.

140.13
Each
Quantity:

Made in detectable silicone approved for direct contact with food, in accordance with FDA 21 CFR and EU 1935/2004 regulations. Gripper is actuated using a vacuum circuit. It comes with a male G1/8" fitting which makes it compatible with our wide range of vacuum posts, suspensions and 3D printed supports.

  • 46g
  • Temperature range: -4 to 212F
  • Recommended vacuum level: 0.2-0.6 Bar
  • Max. object size: 62mm
  • Recommended payload: 250g
  • Includes Male G1/8 fitting
17.94
Each
18.06
Each
19.06
Each
27.58
Each
29.91
Each
8021 Vacuum Generator Kit for Collaborative Robots

The Vacuum Generator Kit for Cobots by EMI operates off of a 24Vdc, mono-stable signal and is the ideal solution for vacuum EOAT. With an incorporated teachable vacuum switch, 3D printed housing and anti-slip straps, the VGK is a true plug and play solution for your cobot. Contact our Engineering department if you would like to discuss a custom Vacuum EOAT solution.

Item #:
CRA VGK 1
265.00
Each
8102 Ø14mm Cobot Mono-Clamp for Collaborative Robots

EMI designed 3D Printed Cobot Mono Clamps are lightweight, cost effective and easy to use. Simply mount to your Cobot with an existing ISO-9409-1-50-4-M6 or to our Cobot Quick Changer with the included hardware and spacer. Available in 10mm, 14mm, 20mm, 30mm clampable diameters and compatible with a wide variety of components from our EOAT catalog.

Item #:
CRM MC14 A
42.61
Each
8022 Cobot Tubing Manifold Kit 4 Port Ø4mm Tubing

Available with Ø4mm push-to-connect fittings, this Tubing Manifold Kit allows you to transition polyurethane tubing between robot joints and to maintain organized pneumatic circuits whether you use straight, spiral tubing or both!

Item #:
CRA TMK 4P04
48.50
Each