Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Vacuum EOAT Kits  > 8090 Schmalz CobotPump Electric Vacuum

8090 Schmalz CobotPump Electric Vacuum Generator ECBPM For Collaborative Robots

Item #:ECBPM UR 
Available: In Stock

The CobotPump ECBPM is designed especially for the automated handling of small parts with a single vacuum cup. This lightweight and compact solution is typically used on collaborative robots with a lifting capacity of up to three kilograms.

Certified by Universal Robots

Overtightening screws can cause stress cracks, which causes a complete loss of vacuum seal. Pay close attention to the steps below and refer to the linked document 'Mechanical & Electrical Interface Details' for more information.

1598.47
Each
Quantity:
  • Fully electric, no need for compressed air.
  • Energy saving control mode ensures efficient operation.
  • Mechanical connection via flange adapter plate.
  • Please refer to the 'Mechanical Interface' tab for important installation instructions
  • Central electrical interface and simple control.
  • Electrical connection via external cable routing or internal pin connection.
  • Universal integration into any lightweight robot or cobot.
8080 piSOFTGRIP® Gripper with 3 silicone fingers (size 50)

Cost effective, simple and robust. This silicone gripper is ideal for sensitive and lightweight object handling and includes a Male G1/8 Fitting.

Item #:
CRG PSG 3S G18M
140.13
Each
8070 piSOFTGRIP® Gripper with 3 Silicone Fingers (size 30)

Cost effective, simple and robust. This silicone gripper is ideal for sensitive and lightweight object handling and includes a G1/8 fitting.

Item #:
CRG PSG30 3S G18M
88.45
Each
2.55
Each
5173 PIAB Dual Durometer 2-1/2 Bellows 25mm PU Vacuum Cup

These polyurethane vacuum cups are constructed in two different durometers (hardness). The cups have a sturdy and forgiving bellows (60º shore, green) and a large flexible sealing surface (30º shore, yellow) that performs extremely well on uneven surfaces. 30º shore makes these the most flexible sealing surface cups available.

The polyurethane makes them mark free and long lasting. The dual durometer makes these vacuum cups both strong and flexible. Many consider these the best performing polyurethane cup available.

Item #:
GSV BDD 25
21.43
Each
8000 Custom 3D Printed Vacuum Kit For Collaborative Robots

The 3D-V Vacuum Kit by EMI is a 3D printed EOAT that can be made to meet your specific handling needs. All 3D-V kits can have up to 16 vacuum cups within a 375mm x 275mm footprint. EMI can provide the ideal tool to you that is both lightweight and smart with an integrated sensing module.

Certified
Item #:
CR3 3DV A
0.00
Each
Contact us to order
 
5977 ShorTec Dual Durometer 1-1/2 Bellow 20mm Vacuum Cup

Dual durometer-style vacuum cups are considered to be the best performing polyurethane cup and are now available at a lower price. These blue dual durometer cups are comparable to the brand-name OEM green and yellow cups in that they use mark-free and long-lasting polyurethane, have the same dual-shore rating, and fit the same size nipples.

Item #:
15B DD 20
5.04
Each
1647 Hithane Flat 20mm Vacuum Cup

This hybrid non-marking cup combines the high temperature and flexibility properties of silicone with the wear resistance and non-marking properties of polyurethane. It contains no silicone so it is suitable to be used with parts that will be painted. Hithane is designed not to leave residue, mold release marks, or ghost marks on hot, injection molded plastic parts.

Item #:
GSV FHT 20
5.26
Each
1654 Hithane 1-1/2 Bellows 33mm Vacuum Cup

This hybrid non-marking cup combines the high temperature and flexibility properties of silicone with the wear resistance and non-marking properties of polyurethane. It contains no silicone so it is suitable to be used with parts that will be painted. Hithane is designed not to leave residue, mold release marks, or ghost marks on hot, injection molded plastic parts.

Item #:
GSV BHT 33
10.66
Each
8401 Wingman Automatic Quick Changer Kit For UR and Fanuc CRX (1 Robot, 2 EOAT sides)

With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production. This tool changer kit has everything you need to get started.

Item #:
WM1 DK 05 00 A
3622.00
Each
8411 Wingman Robot Side Automatic Quick Changer

With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production.

Item #:
WM1 P 01 01 01
497.00
Each
8412 Wingman EOAT Side Automatic Quick Changer

With Wingman automatic tool changers, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production.

Item #:
WM1 P 02 01 01
639.00
Each