S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Nippers  >  Round Nipper Bodies  > 699 Vessel Standard Nipper Round Body Size 50

699 Vessel Standard Nipper Round Body Size 50

Item #:GSN NR50 
Available: In Stock

Vessel nippers are top quality and perform reliably. The nipper body housings are made of aluminum, and are lighter than comparable nippers. Vessel nippers have two available input ports for compressed air. Use one while the other is plugged. Vessel nippers also have bottom mounting holes for mounting options. Note, the rotating endcap can change the orientation of the air inlet port.

896.00
Each
Quantity:

Due to the dimensions of this nipper, only a few select blades are compatible. Please use ONLY these blades: For Plastic cutting: N50AB (Quick# 2353), N50AJ-L (Quick# 2218), N50ABH-41 (Quick# 2354), N50AL (Quick# 2355). For metal cutting: N50AS (Quick# 4018), and N50BBB (Quick# 4019).

  • 1200g
  • Purchase Blades Separately, see note above. Related Blades are listed below.
  • Lightweight aluminum body
  • 12mm Cutting capacity
  • ∅75mm body
  • 1058 lbf Cutting force
  • R1/8" Air port

Style & size

Style
Vessel
Size
Size 50
88.00
Each
56.50
Each
2.53
Each
2.91
Each
4018 Vessel Alloy Blade with 0° Angle for Cutting Wire

Basic blade with carbide tip used for cutting copper and steel wire.

Item #:
GSN N50AS
428.00
Each
4019 Vessel Blade with Carbide Tips with 35° Angle for Cutting Wire

This blade has increased strength with a shorter cutting edge than the standard type. More welding pressure is created because it cuts at the base of the blades.

Item #:
GSN N50BBB
491.00
Each
2353 Vessel Deep Angle Nipper Blade, Size 50 30° Steep Angle

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

  • Very high initial sharpness.
  • Excellent for harder to cut plastics.
  • May take more maintenance to keep blades sharp.
Item #:
GSN N50AB
840.00
Each
2354 Vessel Deep Angle Nipper Blade, High Speed, Size 50 30° Steep Angle

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

  • Very high initial sharpness.
  • Excellent for harder to cut plastics.
  • May take more maintenance to keep blades sharp.
  • Forged blades from high speed steel and hardened.
Item #:
GSN N50ABH 41
840.00
Each
2218 Vessel Inline Nipper Blade, Size 50 Straight Cut

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

  • Very high initial sharpness.
  • Excellent for harder to cut plastics.
  • May take more maintenance to keep blades sharp.
Item #:
GSN N50AJ L
810.00
Each
2355 Vessel Perpendicular Nipper Blade, Size 50

Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.

  • Very high initial sharpness.
  • Excellent for harder to cut plastics.
  • May take more maintenance to keep blades sharp.
Item #:
GSN N50AL
1302.00
Each
Enter the quantity for each needed part and click add to cart
No. Part No. Item Description Qty Req. Price Qty
n/a GSN RA HRS50
5349 Vessel Parts Kit for NS50 & NR50
0
90.21
Each
n/a 852308
Piston for NR50 Nipper Body
0
267.27
Each
n/a GSN BA HR50
2600 Vessel Pin & Spring Kit for NR50
0
58.00
Each
Enter the quantity for each needed part and click add to cart