S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Quick Changers  >  Quick Changers  > 1815 Senvex / WGS Quick Changer Large Robot-Side

1815 Senvex / WGS Quick Changer Large Robot-Side

Item #:GSQ LR 
Available: In Stock

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

795.00
Each
Quantity:
  • 1260g
  • Maximum air pressure: 87psi (6 bar)
  • 10 Ports, G1/4" O.D. air ports
  • Electrical connector is optional

SST

Style
Senvex
Type
Robot Side QC
Size
10 Port - Large
5039 Quick Changer Robot Side Electrical Connector

This quick changer accessory connects electrical signals from the EOAT to the robot. It has 15 pin gold plated SUB D connectors and comes complete with mounting hardware.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
CAQC
79.00
Each
21.00
Each
1817 Quick Changer Plate Large EOAT Mounting Adaptor

Typically used when the injection molding machine is over 750 tons, this plate is designed to mount large/jumbo >ASS<, Gimatic, and 80/20 four- and six-groove profiles (80mmx40mm) as well as all standard four- and six-groove >ASS<, Gimatic, and 80/20 profiles. It is pre-drilled to mount to the large EOAT quick changer. The counter-bored holes provide flush mounting surfaces on both sides. And it can also be used as a manual mounting plate to the robot.

Item #:
GSC QCAP L
78.00
Each
760 Quick Changer Basic Blank EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles. It's scored with a center line making it easy to locate holes for mounting to your robot tooling plate.

Item #:
GSC QCAP LB
85.65
Each
5837 Gimatic Quick Changer Large Adaptor Plate

Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.

Item #:
MFI A103
38.15
Each
295.00
Each
Item #:
QC150 H
36.80
Each
7.00
Each
4.80
Each
3.35
Each
5.10
Each
3.16
Each
2.04
Each
1.74
Each
4.15
Each
5.55
Each
1.65
Each
2.46
Each
1793 Aluminum EOAT Centering Pin for Large Senvex/WGS QC's

This centering pin helps the manual centering of heavy EOAT's

Item #:
GSQ CP QC150
28.00
Each
1816 Senvex / WGS Quick Changer Large EOAT Side

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

Item #:
GSQ LG
430.00
Each
Item #:
QC150 V
36.80
Each
34.00
Each
65.00
Each
502 Low-Profile Electric QC Connector - Robot Side

I/O Connection Type: 15-pin Screw terminal module

Item #:
WGS QLEKRD
81.00
Each
9.50
Each