S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Sprue Grippers  >  Jumbo Body Sprue Grippers  > 3770┬áDouble Acting Gripper with Self Adjusting Single Stroke

3770 Double Acting Gripper with Self Adjusting Single Stroke and PNP Sensor on Jaw

Item #:HUZ P 32 50 CS 
Available: In Stock

The GRZ 32 grippers are designed to pull parts out of a tool. These HUZ grippers have a built-in single-stroke of 20 or 30mm for a combined 50mm stroke. A pull tab at the part is recommended.

942.00
Each
Quantity:
  • 1440g
  • 12mm Applicable Sprue
  • Single stroke - Double Acting (two air lines are required for open/close)
  • The CS version has a part present sensor built into the jaws. It requires a 8mm 3 pin female connector.
  • New sliding guides are self-adjusting to compensate any play.
  • Reference: 1-739-24-00
3758 5mm Stroke Reducer Use with KHZ32/SZD32/HUZ/DSC

The DB stroke reducers clip on the shaft and allow stroke adjustments on the fly in 5, 10, or 15mm increments. They work with the following components: KHZ-32 cylinders, SZD-32, HUZ-stroking grippers, and DSC double stroking cylinders.

Item #:
DB 5 32
9.00
Each
3759 10mm Stroke Reducer Use with KHZ32/SZD32/HUZ/DSC

The DB stroke reducers clip on the shaft and allow stroke adjustments on the fly in 5, 10, or 15mm increments. They work with the following components: KHZ-32 cylinders, SZD-32, HUZ-stroking grippers, and DSC double stroking cylinders.

Item #:
DB 10 32
10.00
Each