S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Specialty Grippers  >  Electric Grippers  >  MPBS - Two-Jaw Angular Sprue Gripper  > 7372 MPBS Mounting Bracket with 14mm Dia. Shaft

7372 MPBS Mounting Bracket with 14mm Dia. Shaft

Item #:MFI A354 
Available: In Stock

40.14
Each
Quantity:
MFI A354
  • 25g
  • For MPBS Electric Grippers
  • Includes Mounting kit
7349 Gimatic 2-Jaw Angular Self-Centering Electric Gripper MPBS

Gimatics electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.
A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.

Item #:
MPBS1630
889.00
Each
7355 Gimatic 2-Jaw Angular Self-Centering Electric Gripper MPBS

Gimatics electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.
A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.

Item #:
MPBS1630N
889.00
Each
7356 Gimatic 2-Jaw Angular Self-Centering Electric Gripper MPBS NPN Sensor included on jaw

Gimatics electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.
A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.

Item #:
MPBS1630NS
928.00
Each
7350 Gimatic 2-Jaw Angular Self-Centering Electric Gripper MPBS PNP Sensor included on jaw

Gimatics electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.
A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.

Item #:
MPBS1630S
928.00
Each
10.00
Each
8.00
Each
10.00
Each
9.35
Each