S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Specialty Grippers  >  Gimatic ID Grippers  > 6837 Gimatic Expansion Gripper MFU10

6837 Gimatic Expansion Gripper MFU10 10.5-14mm Range, EPDM

Item #:MFU10E02HL 
Available: In Stock

Gimatics Expansion Grippers rely on compressing an elastic expander rather than inflating a bladder. Gimatics patented expansion grippers have better durability and uptime because leaks and blow outs are eliminated. The MFU has an upward motion that compresses the expander. The OAL is reduced. Optional nose cones for centering, proximity magnetic sensors for part detection, mounting adaptors for extended reach and a large selection of clamps make this a perfect choice for many applications.
Silicone or EPDM? Silicone is non-marking, has a wider temperature range, and longer life span. Maximum temperature is 392F. EPDM is non-marking and provides more friction for a stronger grip. Maximum temperature is 284F.

173.00
Each
Quantity:
  • 17g
  • Upward movement
  • EPDM elastic expander with 284°F Max temp.
  • ∅10.5–14mm Grip diameter
  • Leak Test side port style
  • ∅14mm Clampable body
  • M12x1 Mounting thread with M5 Air port

Gimatic Expansion Grippers

Action
Up
Material
EPDM
Minimum Diameter
10mm
3.10
Each
4.40
Each
3.30
Each
3.50
Each
5379 MFD MFU 10mm EPDM Replacement Expander

No periodic maintenance is necessary for the Gimatic Expansion Grippers. The expander can be replaced when worn. The expected medium life time of the EPDM expander is about 500,000 cycles while silicone is about 1 million cycles. The expander can be cut (direction showed in the photo) to remove it from the gripper body. It is not necessary to dismantle the gripper to mount the new expander. It must not be glued nor greased.

Item #:
IF10E02
6.30
Each
2.51
Each
10.00
Each
8.00
Each
10.00
Each