EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7408 Gimatic 2-Jaw Parallel Electric Gripper with Long Stroke MPRJ 50mm Stroke
Gimatic electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.
A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.
- 480g
- 50mm Stroke
- 5.4lbf Total gripping force
- Plug & play user friendly gripper.
- No electricity consumption when gripper is engaged.
- Gripper retention guaranteed in event of blackout.
- Self Adapting jaws part.
- Long life Brushless motor (Brushless DC).
- 24 Vdc Low Voltage Power Supply.
- M8x1, 3 poles standard connection.
- Controllable by PLC as a pneumatic valve.
- Exclusive self-centering system.
- Fiber-carbon gear reduction.
- 10 milion cycle maintenance-free.
- Well protected against dusty environments.
- Weight-dimensions-force best trade off.
- Rotary actuator fitting compatible.
- Optional inductive sensors.
Plate for mounting Mechatronic (Electric) grippers onto a robot with ISO 9409-1-50-4-m6 Interface
Plate for mounting Mechatronic (Electric) grippers onto a robot with ISO 9409-1-50-4-m6 Interface
Allows direct connection from Gimatic 3-pin electric gripper to UR Tool I/O (wrist)
The Gimatic KIT-UR-J is an industrial electric gripper with a long stroke that plugs straight to your Universal Robot’s wrist connector. Delivered with finger blanks. Contact EMI for custom fingers. The Kit-UR-J is a 2-jaw parallel gripper with a safety shroud and capacitor box. This gripper has a long stroke with a fast opening/closing motion.
