S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Specialty Grippers  >  Electric Grippers  >  MPXM - Two-Jaw Parallel Gripper  > 7268 Gimatic 2-Jaw Electric Parallel Gripper MPXM

7268 Gimatic 2-Jaw Electric Parallel Gripper MPXM 2x10mm Stroke

Item #:MPXM3220 
Available: In Stock

Gimatic electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability. They operate in an on/off manner receiving their signal directly from a control panel. There is no programming needed or intermediary control device. An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.
A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required.

Custom 3D printed gripper fingers are available, Contact EOAT Engineering today!

1147.00
Each
Quantity:
  • 604g
  • Built in motor drive
  • Self–centering jaw system
  • 2x10mm Stroke
  • 48.33lbf Total gripping force
  • T–slot style jaws for heavy loads
  • 24 volt DC with on/off signal from PLC
  • IP54 Environmental Degree
13.00
Each
13.00
Each
6282 Gimatic C-Slot PNP Sensor with M8 Connector

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS3N203G
29.96
Each
1882 Gimatic C-Slot PNP Sensor with 2.5m lead SS Style

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4N225G
26.14
Each
8087 M8 90° Female Connector 8 pin, 200mm leads

Ideal for DIY end effectors to be used on Collaborative Robots. Compatible with the QC-75 electrical connector. Can also be used with our entire line of electric grippers.

Item #:
CFGM890802P
32.58
Each