S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Gripper Fingers  >  Gripper Fingers  > 6597 Gimatic 35° Gripper Finger with Sensor Slot OFA50-35S

6597 Gimatic 35° Gripper Finger with Sensor Slot OFA50-35S

Item #:OFA50 35S 
Available: In Stock

35 degree gripper fingers are commonly used in two applications. They are often used to reach behind the part and help snap the part out of the mold. And they are also used in conjunction with vacuum cups to help stabilize large or deep core parts. This reduces shear on the vacuum cup and allows it to maintain a good seal. Vacuum cup flexing is reduced while the part is in transport.
Dual sensor slots provide confirmation of the finger position. The sensor slots extend the overall length of the gripper finger body. This is an advantage because gripper fingers almost always require the use of extensions for achieving sufficient reach.

297.00
Each
Quantity:
  • 1060g
  • 50mm Clampable body – sensors are recessed so mounting can be placed along the full length of the body
  • M45x1.5 Male thread with G1/8" Air port

Finger grippers

Style
Gimatic
Type
35° Gripper Finger
Sensor
Sensor Body
Outside Diameter
50mm
2.65
Each
2.90
Each
3.50
Each
3.75
Each
1884 Gimatic 3-Wire C-Slot NPN Sensor with M8 Connector

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

Item #:
SS3M203G
29.96
Each
6282 Gimatic 3-Wire C-Slot PNP Sensor with M8 Connector

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS3N203G
29.96
Each
1883 Gimatic 3-Wire C-Slot NPN Sensor with 2.5m lead

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4M225G
26.14
Each
1882 Gimatic 3-Wire C-Slot PNP Sensor with 2.5m lead

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4N225G
26.14
Each