Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Sprue Grippers  >  Mini Body Sprue Grippers  > 7700 Gimatic Mini Sprue Gripper with Sensor Slot

7700 Gimatic Mini Sprue Gripper with Sensor Slot

Item #:PB 0013 S2 
Available: In Stock
  • Simple, easy sensing. A sensor slot mounted on the body confirms sprue gripped* without interfering with the part and eliminates the "hide and seek" process of sensor set-up.
  • Higher grip force than other similarly sized sprue grippers.
  • Serrated fingers hold small and medium sprues firmly.

*Note: When trying to sense “sprue gripped” confirmation, the sensor will only send a signal when the gripper is actuated with compressed air.

119.00
Each
Quantity:
  • 50g
  • Angular, non-self centering
  • Use Gimatic SSY.. or PRO-SSR style magnetic sensors (see below)
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
  • Gripper must be connected to compressed air to get a sprue gripped confirmation.
  • 3–9mm Applicable Sprue
  • 14.5lbf Force at 25mm Tooling Length. (tooling length is measured at jaw pivot point.)

Gripper

Style
Gimatic & Senvex
Jaw Style
Serrated Jaws
Sensor
With Sensor Slot
6.80
Each
6.80
Each
6.80
Each
11.50
Each
11.50
Each
11.50
Each
29.89
Each
7446 Sprue Pusher for Gimatic PB Sprue Grippers, For use with OFC14 Cylinders

This 3D printed (PA12 Nylon) bracket is an accessory that allows a OFC-14-10 Cylinder to be easily mounted to the body of a PB gripper. The OFC cylinder can be equipped with a few optional accessories intended to eject a runner stuck to the jaw of the gripper.

Item #:
OFC A006
36.18
Each
37.75
Each
4.16
Each
5.95
Each
4.19
Each
4.47
Each
Item #:
SSY4M225G
27.20
Each
Item #:
SSY4N225G
27.20
Each
Item #:
SSY3M203G
31.16
Each
Item #:
SSY3N203G
31.16
Each
7647 Gimatic 5-Wire Teachable C-Slot NPN Sensor with M8 Connector and 2 programmable positions

Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

Item #:
PRO SSR3M215G
87.00
Each
7646 Gimatic 5-Wire Teachable C-Slot PNP Sensor with M8 Connector and 2 programmable positions

Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

Item #:
PRO SSR3N215G
87.00
Each
7645 Gimatic 5-Wire Teachable C-Slot NPN Sensor with 2.5m lead and 2 programmable outputs

Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

Item #:
PRO SSR4M225G
70.00
Each
7644 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead and 2 programmable outputs

Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

Item #:
PRO SSR4N225G
70.00
Each
Enter the quantity for each needed part and click add to cart
No. Part No. Item Description Qty Req. Price Qty
n/a 107 M5
319 M5 Internal Hex Threaded Plug
0
1.30
Each
n/a AA 22 6
Replacement Magnet for many AA, DD & PB Gimatic Grippers
0
1.29
Each
n/a PB 0013 20
Gimatic PB Gripper Replacement Main Spring
0
3.29
Each
n/a PB 0015 KITU
Seal, Pin & Screw Kit
0
16.00
Each
Enter the quantity for each needed part and click add to cart