EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7701 Gimatic Mini PB Sprue Gripper with Aluminum Jaw and Sensor Slot
- Simple, easy sensing. A single sensor mounted on the gripper body confirms sprue gripped* and eliminates the "hide and seek" process of sensor set-up.
- Higher grip force than other similarly sized sprue grippers.
- Interlaced and serrated fingers hold small and medium sprues firmly.
- ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
*Note: When trying to sense “sprue gripped” confirmation, the sensor will only send a signal when the gripper is actuated with compressed air.
- 60g
- Serrated fingers hold small and medium sprues firmly.
- 3–9mm Applicable Sprue
- Single-acting with protected opening spring.
- New Sensor Slot position provides sensing without interfering with the part being gripped.
- Use Gimatic SSY or SSR sensors recommended (see below)
- Gripper must be connected to compressed air to get a sprue gripped confirmation.
- 10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
Gripper
Use Gimatic SSY sensors with new series S2 PB Grippers.
Use Gimatic SSY sensors with new series S2 PB Grippers.
Use Gimatic SSY sensors with new series S2 PB Grippers.
Use Gimatic SSY sensors with new series S2 PB Grippers.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
Gimatic PRO-SSR sensors are digital magnetoresistive sensors with 2 programmable output signals: open, closed, and one that detects any position in the middle. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.
| No. | Part No. | Item Description | Qty Req. | Price | Qty |
| n/a | 107 M5 |
319 M5 Internal Hex Threaded Plug
|
0 |
1.30
Each
|
|
| n/a | AA 22 6 |
Replacement Magnet for many AA, DD & PB Gimatic Grippers
|
0 |
1.29
Each
|
|
| n/a | PB 0013 20 |
Gimatic PB Gripper Replacement Main Spring
|
0 |
3.29
Each
|
|
| n/a | PB 0015 KITU |
Seal, Pin & Screw Kit
|
0 |
16.00
Each
|
|