S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  General Purpose Grippers  >  Parallel - Single Acting, Versatile (PQ)  > 7141 Gimatic Two-Jaw Parallel Gripper PQ3015

7141 Gimatic Two-Jaw Parallel Gripper PQ3015

Item #:PQ3015 
Available: In Stock
625.00
Each
Quantity:
  • 330g
  • 2x7.5mm Stroke
  • Double acting. Can be setup as Normally Open or Normally Closed by swapping the jaw that each gripper finger is mounted to. See Gripper Operation tab or 'Additional Specifications' pdf that is linked above.
  • Self–Centering
  • Optional magnetic and inductive sensors available
7525 Gimatic 5-Wire Teachable C-Slot PNP Sensor with M8 Connector

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Item #:
PRO SS3N215G
88.00
Each
1884 Gimatic 3-Wire C-Slot NPN Sensor with M8 Connector

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

Item #:
SS3M203G
29.96
Each
6282 Gimatic 3-Wire C-Slot PNP Sensor with M8 Connector

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS3N203G
29.96
Each
7522 Gimatic 5-Wire Teachable C-Slot NPN Sensor with 2.5m lead

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Item #:
PRO SS4M225G
67.00
Each
7521 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

Item #:
PRO SS4N225G
67.00
Each
1883 Gimatic 3-Wire C-Slot NPN Sensor with 2.5m lead

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4M225G
26.14
Each
1882 Gimatic 3-Wire C-Slot PNP Sensor with 2.5m lead

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4N225G
26.14
Each
7526 Gimatic 5-Wire Teachable C-Slot PNP Sensor with M8 Connector

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Item #:
PRO SN3N215G
88.00
Each
29.96
Each
29.96
Each
7524 Gimatic 5-Wire Teachable C-Slot NPN Sensor with 2.5m lead

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Item #:
PRO SN4M225G
67.00
Each
7523 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead

Gimatic PRO-SN sensors are digital magnetoresistive sensors with up to 3 programmable output signals that fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs.

Item #:
PRO SN4N225G
67.00
Each
26.14
Each
26.14
Each