Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Sensors / Electrical  >  Gimatic Teachable Sensors  > 7521 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead

7521 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead

Item #:PRO SS4N225G 
Available: In Stock

Gimatic PRO-SS sensors are digital magnetoresistive sensors with up to 3 programmable output signals, for example: gripper fully open, gripper fully closed, and part gripped. They fit in Gimatic C shaped sensor slots. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. Configuring the outputs is achieved through a simple one-button interface.

70.00
Each
Quantity:
  • Easy single button programming. See the Programming Procedure linked document for further information.
  • Highly accurate, makes this ideal for part confirmation/mid-stroke detection for any size gripper.
  • Ideal for applications where space is limited and multiple output signals are needed, up to 3 positions.
  • Each output can be independently configured to Normally Open or Normally Closed and is clearly identified by LEDs.
  • Wide +/- 30mm sensing range (relative to the magnet and the sensor).
  • 5-Wire lead cable, 2.5m: Brown - 24Vdc, Blue - 0Vdc, Black - Output 1, White - Output 2, Grey - Output 3
  • 12/24 Vdc, 0.2 A, PUR round cable 5x0.09mm2 length 2.5 meters with set screw

Sensors

Type
with Lead
Signal
PNP
7650 Pro Teachable Sensor Pendant Mounting Bracket

Use this mounting bracket to mount Gimatic PRO teachable sensors to profile or plate EOAT

Item #:
PRO SPB
4.99
Each