Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Quick Changers  >  Quick Changers  > 5035 Gimatic Quick Changer Standard Size (90mm), Robot Side

5035 Gimatic Quick Changer Standard Size (90mm), Robot Side

Item #:QC90 A 
Available: In Stock

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

302.00
Each
Quantity:
  • 318g
  • Maximum air pressure: 87psi (6 bar)
  • 8, G1/8" O.D. air ports
  • Electrical connector is optional

SST

Style
Gimatic
Type
Robot Side QC
Size
90mm (Standard)
5039 Quick Changer Robot Side Electrical Connector

This quick changer accessory connects electrical signals from the EOAT to the robot. It has 15 pin gold plated SUB D connectors and comes complete with mounting hardware.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
CAQC
82.00
Each
21.84
Each
544 Quick Changer Basic Blank Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles. It's scored with a center line making it easy to locate holes for mounting to your robot tooling plate.

Item #:
GSC GMB 150
42.80
Each
757 Quick Changer Basic EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles.

Item #:
GSC QCAP 1
32.00
Each
753 Quick Changer Basic Blank EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles.

Item #:
GSC QCAP 1B
35.86
Each
1664 Quick Changer Plate EOAT Mounting Adaptor

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles.

Item #:
GSC QCAP 2
42.80
Each
5836 Gimatic Quick Changer Standard Adaptor Plate

Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.

Item #:
MFI A102
27.25
Each
182.00
Each
7380 Aluminum EOAT Centering Pin for Standard Gimatic QC's

This centering pin helps the manual centering of heavy EOAT's

Item #:
QC9065
25.00
Each
3.90
Each
4.74
Each
5997 Storage Hanger for Standard Size Quick Changer QC90 (Vertical)

For vertical wall mounting and storage of EOAT's

Item #:
QC90 V
32.86
Each
7564 Gimatic Quick Changer with Integrated Flange Standard Size (90mm), EOAT Side

This EOAT Side Quick Changer with added Flange is a unique component that reduces backlash and provides better alignment.

Item #:
QCP90 B
203.00
Each
7561 Additional Air Ports for Standard Size Gimatic QC 2-ports, Robot Side

These two additional air ports can be added to Regular (QC-90) Quick Changers.

Item #:
QCA90 A
56.00
Each
67.60
Each
35.36
Each
502 Low-Profile Electric QC Connector - Robot Side

I/O Connection Type: 15-pin Screw terminal module. Suitable for use with >ASS<, Senvex, and Gimatic Quick Changers. Certain Quick Changers require spacers for the electrical connector, see below.

Item #:
WGS QLEKRD
81.00
Each
7.88
Each
5060 Quick Changer Robot Side Electrical Connector with Spring Contacts

The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.

I/O Connection Type: 15-pin D-Sub, VGA type Cable.

Item #:
MAQC
79.00
Each
7456 Quick Changer Robot Side 90° Electrical Connector with Spring Contacts

The lower profile pin design helps avoid damage to contacts. The spring assists in maintaining connection through constant compression and pin geometry. This provides simpler and easier coupling through self-aligning geometry.

I/O Connection Type: 15-pin Spring-Clip terminal module

Item #:
PMAQC
79.00
Each
7458 RFID Quick Changer Robot Side Electrical Connector

RFID identification module for automatic recognition of gripping tool composed of the Reader (RAQC) and the Tag (RBQC).

Item #:
RAQC
326.00
Each
5036 Gimatic Quick Changer Standard Size, (90mm) EOAT Side

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

Item #:
QC90 B
192.00
Each
5013 Lock Unit for Quick Changers with Sensor Feedback

This Lock unit prevents accidental falling of the EOAT when used with Gimatic Quick Changers sized: 90, 150, 160, and 200. Lock unit ONLY works with newer model Gimatic Quick Changers that have a threaded hole.
3 kinds of safety: mechanical thanks to the spring actuated lock, electrical thanks to the magnetic sensor and electronic thanks to the inductive sensor.

Item #:
LOQC
51.31
Each
Enter the quantity for each needed part and click add to cart
No. Part No. Item Description Qty Req. Price Qty
n/a QC90 12
315 O-Ring Seal for Nipple OD
0
0.20
Each
n/a QC90 05
Replacement Nipple for QC90A
0
2.88
Each
Enter the quantity for each needed part and click add to cart