Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...

7596 Upgrade Kit for SGP-20S Use with PRO-SN Sensors

Item #:SGP 20S KU 
Available: In Stock

Upgrade your old style SGP Grippers: Old grippers can be upgraded to use the new Gimatic teachable PRO-SN sensors

6.70
Each
Quantity:

In 2020, Gimatic will be assembling and shipping SGP-S grippers with a provision for the new programmable PRO-SN Sensors. This gives the ability to program up to 3 sensing positions on the gripper with one sensing point and has the accuracy to sense mid-stroke conditions. You can use this kit to upgrade your current SGP-S gripper.

Advantages:

  • Accurate three position sensing with one sensor: open, part captured, part missed.
  • Buying one PRO-SN.. Sensor is less expensive than buying two Inductive sensors
  • Type

    Type
    Upgrade Kit
    7634 Gimatic 5-wire Teachable C-Slot NPN Sensor with M8 Connector , High Sensitivity

    Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

    Item #:
    PRO SN3M215HSG
    80.00
    Each
    7633 Gimatic 5-Wire Teachable C-Slot PNP Sensor with M8 Connector , High Sensitivity

    Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

    Item #:
    PRO SN3N215HSG
    80.00
    Each
    7636 Gimatic 5-Wire Teachable C-Slot NPN Sensor with 2.5m lead , High Sensitivity

    Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

    Item #:
    PRO SN4M225HSG
    70.00
    Each
    7635 Gimatic 5-Wire Teachable C-Slot PNP Sensor with 2.5m lead , High Sensitivity

    Gimatic PRO-SN high sensitivity sensors are digital magnetoresistive sensors with up to 3 programmable output signals for SGP-S Grippers. When the programmed switched position is reached, the corresponding output is activated, and its status is indicated visually with the LEDs. The type of output can also be programmed (N.O. or N.C.) whereas type of the sensor (PNP or NPN) is set at the factory and cannot be changed.

    Item #:
    PRO SN4N225HSG
    70.00
    Each