EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7649 Gimatic Quick Changer SQP160-B, EOAT Side With Soft springs and Double-Acting Cylinder
Easily add compliance to your EOAT with this mounting plate.
- 2898g
- Payload: 44lbs (20kg)
- Gripper side with optional soft springs that are included and double-acting cylinder and is intended for locking in fully extended or compressed positions.
- Spring force: Each spring: 8N (extended) - 47N (compressed)
- Cylinder force: 754N at 6bar
- Cylinder bore: 40mm
- Plate can be rotated 90 degrees (see application example in next tab).
- Compatible with Size 2 Dovetail QC’s and, Large (150mm / 160mm) Round QC’s. (see below Related Items)
- Includes mounting hardware for fastening profiles on your end of arm tooling directly to the front of this unit.
This square tool changer with one handle is fully interchangeable with the standard and common dovetail units.
Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).
Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).
Standardize quick changers on all your robots. SWM fit on every robot make and model. Base plates are less expensive than OEM robot eoat quick changer. When equipped it allows to run eoats on different brand robots without any alterations.
Standardize quick changers on all your robots. SWM fit on every robot make and model. Base plates are less expensive than OEM robot eoat quick changer. When equipped it allows to run eoats on different brand robots without any alterations.
This dove-tail style quick changer features a single hand locking mechanism. A safety latch prohibits accidental opening. An optional IES 8 sensor can be used to verify the locked position.
Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).