Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Quick Changers  >  Quick Changers  > 3818 >ASS< Quick Changer Standard Size (90mm), EOAT Side

3818 >ASS< Quick Changer Standard Size (90mm), EOAT Side

Item #:SWH G 90 
Available: In Stock

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

194.25
Each
Quantity:
  • 212g
  • Maximum air pressure: 87psi (6 bar)
  • 8, G1/8 O.D. air ports
  • Reference: 1-021-09-00

SST

Style
>ASS<
Type
EOAT Side QC
Size
90mm (Standard)
3.51
Each
3.90
Each
4.47
Each
4.74
Each
503 Low-Profile Electric QC Connector - EOAT Side

I/O Connection Type: 15-pin Screw terminal module. Suitable for use with >ASS<, Senvex, and Gimatic Quick Changers. Certain Quick Changers require spacers for the electrical connector, see below.

Item #:
WGS QLEKGD
81.00
Each
3834 >ASS< Quick Changer Adaptor Plate Use with Standard Size SWH G 90

Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.

Item #:
GP SWH G 90
25.73
Each
544 Quick Changer Basic Blank Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles. It's scored with a center line making it easy to locate holes for mounting to your robot tooling plate.

Item #:
GSC GMB 150
42.80
Each
757 Quick Changer Basic EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles.

Item #:
GSC QCAP 1
32.00
Each
753 Quick Changer Basic Blank EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles.

Item #:
GSC QCAP 1B
35.86
Each
1664 Quick Changer Plate EOAT Mounting Adaptor

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles.

Item #:
GSC QCAP 2
42.80
Each
5997 Storage Hanger for Standard Size Quick Changer QC90 (Vertical)

For vertical wall mounting and storage of EOAT's

Item #:
QC90 V
32.86
Each
3817 >ASS< Quick Changer Standard Size (90mm), Robot Side with Safety Lock and Sensor Bracket

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

Item #:
SWH RV 90
347.50
Each