Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Quick Changers  >  Quick Changers  > 3831 >ASS< Quick Changer Large Size (150mm), Robot Side

3831 >ASS< Quick Changer Large Size (150mm), Robot Side

Item #:SWH R 150 
Available: In Stock

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

530.25
Each
Quantity:
SWH R 150
  • 1145g
  • Maximum air pressure: 87psi (6 bar)
  • 10, G1/4 O.D. air ports
  • Reference: 1-020-15-00

SST

Style
>ASS<
Type
Robot Side QC
Size
150mm (Large)
3832 >ASS< Quick Changer Large Size (150mm), EOAT Side

Quick changers assure the EOAT will be perfectly positioned each time it's mounted to the robot. In addition to helping to prevent damage to the mold or the EOAT, this can also greatly reduce the amount of fine-tuning needed upon set up. Using a quick changer that automatically connects air, vacuum and electrical assures that each time the EOAT is mounted, all of the connections will be correct (i.e. primary vacuum, secondary vacuum, primary air, secondary air etc.).

Item #:
SWH G 150
301.35
Each
4.50
Each
5.63
Each
6.10
Each
6.41
Each
6.99
Each
502 Low-Profile Electric QC Connector - Robot Side

I/O Connection Type: 15-pin Screw terminal module. Suitable for use with >ASS<, Senvex, and Gimatic Quick Changers. Certain Quick Changers require spacers for the electrical connector, see below.

Item #:
WGS QLEKRD
81.00
Each
3837 Spacer for >ASS< Electrical Connectors for Large Size QC

This spacer is required for the connection of the electrical interface SWH ES to the quick change system SWH

Item #:
SWH DS 150
22.58
Each
1817 Quick Changer Plate Large EOAT Mounting Adaptor

Typically used when the injection molding machine is over 750 tons, this plate is designed to mount large/jumbo >ASS<, Gimatic, and 80/20 four- and six-groove profiles (80mmx40mm) as well as all standard four- and six-groove >ASS<, Gimatic, and 80/20 profiles. It is pre-drilled to mount to the large EOAT quick changer. The counter-bored holes provide flush mounting surfaces on both sides. And it can also be used as a manual mounting plate to the robot.

Item #:
GSC QCAP L
99.00
Each
760 Quick Changer Basic Blank EOAT Mounting Adaptor Plate

This anodized aluminum plate can be used as a manual EOAT mounting plate to adapt profiles. It's scored with a center line making it easy to locate holes for mounting to your robot tooling plate.

Item #:
GSC QCAP LB
98.40
Each
Item #:
QC150 H
38.27
Each
Item #:
QC150 V
38.27
Each
3835 >ASS< Quick Changer Adaptor Plate Use with Large Size SWH G 150

Thin-plate interface to mount EOAT side quick changer to Gimatic, >ASS<, and 80/20 profiles. Fasteners and mounting screws are included.

Item #:
GP SWH G 150
37.28
Each
3887 Aluminum EOAT Centering Pin for Large (150mm) >ASS< QC's

This centering pin helps the manual centering of heavy EOAT's

Item #:
RHZ SWH R150
25.20
Each