Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  End-of-Arm Tooling  >  Suspensions / Buffers  >  Gimatic Suspensions with Brake  > 7428 Gimatic VSRF Rotating Suspension with 30mm Clampable Body and Brake

7428 Gimatic VSRF Rotating Suspension with 30mm Clampable Body and Brake Normally Open with 100mm Stroke

Item #:VSRF30100 NO 
Available: Low Stock

New Gimatic suspensions with pneumatic brake solves a problem experienced by many. These devices combine the compliance of a suspension with the rigidity of a fixed location mount. They can be used in applications where height compensation is needed but then the suspension position must be maintained until the part is released. When locked, this prevents the suspension from exerting force which could affect part position or part integrity. Also, by locking the suspension in place, this can reduce the occurrence of overcoming the spring force sometimes experienced in fast moving applications where part inertia is a factor.

Brake suspensions allow the shafts current position to be locked into place. This feature can be useful in many different applications including when parts that require degating and fall immediately upon ejection. After the parts are ejected out of the mold and these suspensions are compressed, simply activate the brake and hold you part stationary for degating.

458.00
Each
Quantity:
  • Aluminum body and steel rod.
  • Two versions are available for flexibility in logic confirmation: Normally Open, Compressed air engages the lock. Normally Closed, Compressed air releases the lock.
  • Rotating clampable body with high load capacity.
  • Magnetic sensor detection (SS Sensors) for all models, Inductive sensor detection (SI Sensors) for NC models only. This only detects brake, not position.

Brand & diameter

Style
Rotate
Diameter
Ø30
1884 Gimatic 3-Wire C-Slot NPN Sensor with M8 Connector

This sensor is the replacement for Part# SS3M203Y. The only difference is it does not come with the adaptor for grippers with a T-slot.

Item #:
SS3M203G
31.16
Each
6282 Gimatic 3-Wire C-Slot PNP Sensor with M8 Connector

This sensor is the replacement for Part# SS3N203Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS3N203G
31.16
Each
1883 Gimatic 3-Wire C-Slot NPN Sensor with 2.5m lead

This sensor is the replacement for Part# SS4M225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4M225G
27.20
Each
1882 Gimatic 3-Wire C-Slot PNP Sensor with 2.5m lead

This sensor is the replacement for Part# SS4N225Y. The only difference is it does not come with the adapter for grippers with a T-slot.

Item #:
SS4N225G
27.20
Each
2.92
Each
2.87
Each
4.16
Each
4.19
Each
5.95
Each
4.47
Each
7584 Gimatic Ball Joint for Vacuum Cups with Brake and G1/8 fitting, Normally Closed

This pneumatically-driven ball joint for vacuum cups includes a brake for joint lock

Item #:
VAB18M18F NC
429.00
Each
7586 Gimatic Ball Joint for Vacuum Cups with Brake and G1/8 fitting, Normally Open

This pneumatically-driven ball joint for vacuum cups includes a brake for joint lock

Item #:
VAB18M18F NO
429.00
Each