S2K Commerce - Products Dropdown
Actions- ${title}
S2K Commerce - Shopping Cart
Actions- ${title}
S2K Commerce - Order Entry
Actions- ${title}
Gimatic TH Three-Jaw Paralell Self-Centering Grippers
- Double acting (with normally open or normally closed option).
- Three jaw stroke range from 2-16mm.
- Optional push bar to assist in part retention or release is included.
- Optional front fastening with through screws.
- Optional sensors available.
- 4990g
- 3x8mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
- 4920g
- 3x16mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.
- 117g
- 3x2.5mm Stroke
- Double acting
- Self–Centering
- Optional magnetic sensors available
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.
- 240g
- 3x2mm Stroke
- Double acting
- Self–Centering
- Optional magnetic sensors available
- 237g
- 3x4mm Stroke
- Double acting
- Self–Centering
- Optional magnetic sensors available
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.
- 440g
- 3x3mm Stroke
- Double acting
- Self–Centering
- Optional magnetic sensors available
- 430g
- 3x6mm Stroke
- Double acting
- Self–Centering
- Optional magnetic sensors available
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.
- 770g
- 3x4mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
- NOTE: If teachable sensors are required for your application of this gripper, we recommend using PRO-SS sensors. Currently, PRO-SN sensors do not consistently fit the gripper’s sensor slots.
- 760g
- 3x8mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
- NOTE: If teachable sensors are required for your application of this gripper, we recommend using PRO-SS sensors. Currently, PRO-SN sensors do not consistently fit the gripper’s sensor slots.
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.
- 1430g
- 3x5mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
- 1420g
- 3x10mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.
- 2490g
- 3x6mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
- 2450g
- 3x13mm Stroke
- Double acting
- Self–Centering
- Optional magnetic and inductive sensors available
This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.