S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...

Gimatic TH Three-Jaw Paralell Self-Centering Grippers

  • Double acting (with normally open or normally closed option).
  • Three jaw stroke range from 2-16mm.
  • Optional push bar to assist in part retention or release is included.
  • Optional front fastening with through screws.
  • Optional sensors available.
1 - 20 of 20
View:
 
Description
Price
Quantity
1787.00
Each
  • 4920g
  • 3x16mm Stroke
  • Double acting
  • Self–Centering
  • Optional magnetic and inductive sensors available
1787.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

153.00
Each
758.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

103.00
Each
786.00
Each
786.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

109.00
Each
804.00
Each
804.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

115.00
Each
  • 770g
  • 3x4mm Stroke
  • Double acting
  • Self–Centering
  • Optional magnetic and inductive sensors available
  • NOTE: If teachable sensors are required for your application of this gripper, we recommend using PRO-SS sensors. Currently, PRO-SN sensors do not consistently fit the gripper’s sensor slots.
846.00
Each
  • 760g
  • 3x8mm Stroke
  • Double acting
  • Self–Centering
  • Optional magnetic and inductive sensors available
  • NOTE: If teachable sensors are required for your application of this gripper, we recommend using PRO-SS sensors. Currently, PRO-SN sensors do not consistently fit the gripper’s sensor slots.
846.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

123.00
Each
946.00
Each
946.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

134.00
Each
1134.00
Each
1134.00
Each

This accessory can be installed in the TH grippers, to hold the payload during the gripper release, by a pushing force F (shown in tab to the right). As an example, when the chuck of a machining equipment is loaded.

140.00
Each
1 - 20 of 20
View: