S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...

Manual Gimatic Quick Changers for Cobots

emi gimatic qc75 quick changer for cobots

Quick Changers are composed of two parts or sides, an EOAT side and a robot side. The robot side is permanently attached to the robot arm. An EOAT side is permanently attached to each individual end-of-arm tooling. To mount the EOAT to the robot, the two sides are fitted together and then locked into position.

Have a specific quick changer in mind that we do not stock below? EMI can build your tooling with almost any quick changer you might have. Contact us today!

Browse Standard Round Gimatic, >ASS< & Senvex Quick Changers.

1 - 10 of 10
View:
 
Description
Price
Quantity

With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any “Plug & Play” end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.

  • 18g
  • 4 Integrated G1/8 pneumatic pass-through ports.
  • Locked position sensing available.
  • Optional electrical connector provides 16 screw terminals.
  • Cobot insdustry standard ISO-9409-1-50-4-M6 mounting pattern.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
36.87
Each

With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any “Plug & Play” end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.

  • 18.5g
  • 4 Integrated G1/8 pneumatic pass-through ports.
  • Locked position sensing available.
  • Optional electrical connector provides 16 screw terminals.
  • Cobot insdustry standard ISO-9409-1-50-4-M6 mounting pattern.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
86.89
Each
  • 140g
  • 18 available prewired electric lines with 18 spring connectors.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
Item#:
CRAQC
Available:
Out Of Stock
415.00
Each
  • 80g
  • 18 available prewired electric lines with 18 spring connectors.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
Item#:
CRBQC
Available:
Out Of Stock
140.00
Each

With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any “Plug & Play” end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.

  • 15g
  • 4 Integrated G1/8 pneumatic pass-through ports.
  • Locked position sensing available.
  • Optional electrical connector provides 16 screw terminals.
  • Cobot insdustry standard ISO-9409-1-50-4-M6 mounting pattern.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
30.77
Each

The system includes both pneumatic and electric connection components to connect power sources between robot and tool. The whole system is a plug & play device with direct connection to the robot wrist and it can be used to transfer pneumatic pressure and vacuum to the tool.

  • 1500g
  • No electric cables along the robot arm: direct connection to M8 plug connector of the robot.
  • Easy to install (plug & play solution).
  • Directly compatible with others EMI and Gimatic UR kits
  • Embedded pneumatic fittings and electric connectors.
1307.00
Each
  • 635g
  • Included: QCY90 Robot Side, Pre-wired PMAQC connector, interface plate, G1/8 fittings, and hardware
  • No electric cables along the robot arm: direct connection to M8 plug connector of the robot.
  • Easy to install (plug & play solution).
  • Directly compatible with others EMI and Gimatic UR kits
828.00
Each
  • 485g
  • Included: QCY90 EOAT Side, Pre-wired PMAQC connector, interface plate, G1/8 fittings, hardware, and compressed air hose
  • No electric cables along the robot arm: direct connection to M8 plug connector of the robot.
  • Easy to install (plug & play solution).
  • Directly compatible with others EMI and Gimatic UR kits
479.00
Each

With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any Plug & Play end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.

  • 260g
  • Suggested payload: 22lbs
  • 4 Integrated G1/8 pneumatic pass-through ports.
  • Locked position sensing available.
  • Optional electrical connector provides 16 screw terminals.
  • Cobot industry standard ISO-9409-1-50-4-M6 mounting pattern.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
256.00
Each

With the same mounting pattern as the tool flange of your cobot (ISO-9409-1-50-4-M6), you can mount any Plug & Play end effector to the QC75-B for a quick and repeatable installation for every job. End effectors can be hard-wired to the QC75-B, or plugged to the wrist connector of your Cobot for even faster setup times.

  • 300g
  • Suggested payload: 22lbs
  • 4 Integrated G1/8 pneumatic pass-through ports.
  • Locked position sensing available.
  • Optional electrical connector provides 16 screw terminals.
  • Cobot industry standard ISO-9409-1-50-4-M6 mounting pattern.
  • Handles both pneumatic and electrical end effectors.
  • Air ports are integrated into the quick changer connection pins (patented) for streamlined pneumatic routing.
  • Electrical connectors are integrated into the quick changer housing for streamlined wiring.
402.00
Each
1 - 10 of 10
View: