S2K Commerce - Products Dropdown


S2K Commerce - Shopping Cart


Web Content Viewer (JSR 286)


Merit Line, Z-Style Steel & Aluminum Conveyors

This versatile conveyor can be used for a wide range of uses including under the press, along side the press or wherever a three-plane conveyor is needed. Nose over makes it perfect for feeding into large containers or onto trunklines.

Minimum Infeed Length: 2.5'
Minimum Discharge Length: 2.5'
Minimum Top Shelf Length: 3'
Combined Lengths: cannot exceed 15'
Available Belt Widths: 6", 9", 12", 18", 24", 30"

Online Interactive Catalog


  • 6-20 FPM 1/3 hp AC variable speed drive
  • 50 lbs. maximum load
  • Double V-guided, FDA approved, white PVC belt with 1 1/2" high cleats on 18" centers
  • 4" high side rails, lapped over conveyor belt
  • Leg sets and swivel castors included. Legs adjustable up to 34" infeed belt height. Specify infeed and discharge belt heights
  • 15' power cord included. Pre-wired ready to run (except polyphase systems which require some customer wiring)
  • Control wiring contained in liquid-tight conduit and connectors
  • Units ship fully assembled

Two Ways to Order:

1. Download Conveyor Specifications Form pdf.

  • Fill in the information in sections C and D—as well as any other information pertinent to your application.
  • Submit by Email or Fax to 216-535-4823.

2. Call EMI at 216-535-4848 (Mon.–Fri., 8 a.m.–5 p.m., EST) - please have the following information available:

  • The conveyor model you are ordering
  • The belt width you need (standard widths are 6", 9", 12", 18", 24", 30")
  • The infeed length (in feet) you need (A dimension) Minimum length 2.5'. A + B + C can not exceed 15'
  • The incline length (in feet) you need (B dimension) Minimum length 2.5'. A + B + C can not exceed 15'
  • The top shelf length (in feet) you need (C dimension) Minimum length 3'. A + B + C can not exceed 15'
  • Standard 20 fpm belt speed (40 fpm, 80 fpm and variable speed also available)
  • Note: Additional widths, lengths, belt speeds, etc. are available.

BW = Belt width
⚫ = Standard starter position (specify if other location)
◪ = Drive location for 24" & 30" models is mounted on the infeed end
Drive location for 9", 12", and 18" models is mounted on discharge end
11" min. infeed belt height w/standard legs and castors
A, B & C dimensions are in 1' increments + 6"


ddz dimensional drawing