Z6_P86CH0O0I0IA70IJ3UMIMC0047
Z7_P86CH0O0IGTEA0INCFLRTN00O6

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_LH54H480N8ELB0Q28ESGFT1G47

New Pneumatic Brake Suspensions

suspensions with brake

Pneumatic brake suspensions combine the compliance of a traditional suspension with the rigidity of a fixed location mount. They can be used in applications where height compensation is needed but then the suspension position must be maintained until the part is released.

When locked, this prevents the suspension from exerting force which could affect part position or part integrity. By locking the suspension in place, this can reduce the occurrence of overcoming the spring force sometimes experienced in fast moving applications where part inertia is a factor..

Air pressure is used to lock (normally open models) or unlock the suspension (normally closed models). Typically a verification signal from a vacuum switch, photo eye, or some sort of proximity switch will signal the condition when to lock or unlock the suspension. Use that signal to send air pressure to the brake suspension.

suspensions with brake

Features:

  • Aluminum body and steel rod.
  • Available with 50mm or 100mm stroke.
  • Pneumatic brake available in two options: Normally open (NO) = Positive pressure to lock, and Normally closed (NC) = Positive pressure to unlock.
  • Available with both rotating or non-rotating shafts.
  • SS Sensors (for all models), SI Inductive Sensors (for NC models only) detects when the brake is engaged, not shaft position.

View additional information on the product pages in e-commerce

Z7_P86CH0O0IOUS20IB0F2R1I0021

S2K Commerce - Products Dropdown

Actions
Loading...