Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Cobot Stands  >  Electric Riser Cobot Stands  > 8960 Fixed Base with Electric Riser Cobot Pedestal

8960 Fixed Base with Electric Riser Cobot Pedestal 16" Adjustable Stroke, 27-43" OAH

Item #:CRS FAE 2743 
Available: In Stock

The Electrically-Driven Riser from EMI offers the same mobility and rugged design as our standard stands, with the added convenience of a precise, 400lbs. capacity lift available in 16in and 24in strokes. With 4 user-defined positions, you can now recall your robots position for the right job with the touch of a button. Alternately, you can disengage the electric actuator for manual operation or in case of power loss. The Electric Riser is compatible with the Mobile Base and can be shipped pre-assembled for your convenience. Once your position is set, it is recommended to tighten the orange riser levers for added stability and peace of mind.

Unit does not include the mobile base that is shown in the additional photos.

3363.00
Each
Quantity:

Electrically-driven riser is actuated by the end user. This product is not to be used as a 7th axis that is controlled by the robot.

  • Weight: 84lbs
  • Aluminum extrusion riser with electrically-driven height adjustment via touch control.
  • Four programmable positions for height adjustment.
  • 400 lbs. maximum lift capacity.
  • Dual handle on each side of riser for tightening in case of loss of power.
  • Cable management included
  • These pedestals can be fixed directly to the floor using ½" floor anchors or integrate onto our mobile base for easy mobility and redeployment.
  • Accepts (4x) ½" floor anchor (not supplied with stand)
  • Need a custom height or configuration? Use this Custom Order form.
8943 Doosan and Fanuc CRX Control Box Mount for Cobot Stand

Designed for both the Doosan and Fanuc CRX control boxs, this bracket is compatible with all EMI Cobot Stands and makes it easy to keep your cobot setup tightly arranged.

Item #:
CRS CBM DO
204.00
Each
8945 Techman Controller Hanger for EMI Cobot Stands

The EMI Control Box Hanger for Techman features a swiveling frame enabling you to work on your I/O board during setup and maintenance, while locking it in place in either position: I/O facing up or down. Q#8945 mounts to the top of the box, under the handles, and it also attaches to the legs of the controller for added stability.

Item #:
CRS CBM TM
204.00
Each
8940 UR Control Box Mount for Cobot Stand

Originally designed for the UR control box, this bracket is compatible with all EMI Cobot Stands and makes it easy to keep your cobot setup tightly arranged.

Item #:
CRS CBM UR
35.00
Each
8942 Cobot Stand Cable Management Assembly

Cobot Stands include 2 of these brackets. Add more brackets to your stand to route and organize even more electrical or Ethernet cables and pneumatic lines.

This kit includes 2 brackets. Hardware is included.

Item #:
CRS CM 1
39.00
Each
8946 Fanuc CRX Pendant Hanger with Adjustable Tilt Angle

Our Adjustable Tilt Angle Teach Pendant hanger is compatible with Fanuc CRX teach pendants. It can be mounted to the riser of your stand.

Whether you are in the middle of programing your cobot, or need to see the teach pendant during production, Q#8946 is a strongly recommended.

Item #:
CRS TPH CRX
136.00
Each
8944 Doosan Teach Pendant Hanger with Adjustable Tilt Angle

Our Adjustable Tilt Angle Teach Pendant hanger is compatible with Doosan teach pendants. It can be mounted to the riser of your stand. With dual locking knobs, it is easy to set up.

Whether you are in the middle of programing your cobot, or need to see the teach pendant during production, Q#8944 is a strongly recommended.

Item #:
CRS TPH DO
109.00
Each
8941 UR Teach Pendant Hanger with Adjustable Tilt Angle

Our Adjustable Tilt Angle Teach Pendant hanger is compatible with UR e-Series and CB Series teach pendants (adapter bracket included). It can be mounted to the control box as well as the riser of your stand. With dual locking knobs, it is easy to set up.

Whether you are in the middle of programing your cobot, or need to see the teach pendant during production, Q#8941 is a strongly recommended.

Item #:
CRS TPH UR
99.00
Each
2809 Din Rail Mount Bracket Kit for Attaching Valves on EMI Cobot Stands or Profile

Use this mounting bracket to attach the JSY.. Solenoid Valve Manifold to our cobot stands. This attaches to both the profile based adjustable height and steel frame fixed height stands.

Item #:
CRA DRM 1
37.89
Each