EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
699 Vessel Standard Nipper Round Body Size 50
Vessel nippers are top quality and perform reliably. The nipper body housings are made of aluminum, and are lighter than comparable nippers. Vessel nippers have two available input ports for compressed air. Use one while the other is plugged. Vessel nippers also have bottom mounting holes for mounting options. Note, the rotating endcap can change the orientation of the air inlet port.
Due to the dimensions of this nipper, only a few select blades are compatible. Please use ONLY these blades: For Plastic cutting: N50AB (Quick# 2353), N50AJ-L (Quick# 2218), N50ABH-41 (Quick# 2354), N50AL (Quick# 2355). For metal cutting: N50AS (Quick# 4018), and N50BBB (Quick# 4019).
- 1200g
- Purchase Blades Separately, see note above. Related Blades are listed below.
- Lightweight aluminum body
- 12mm Cutting capacity
- ∅75mm body
- 1058 lbf Cutting force
- R1/8" Air port
Style & size
Basic blade with carbide tip used for cutting copper and steel wire.
This blade has increased strength with a shorter cutting edge than the standard type. More welding pressure is created because it cuts at the base of the blades.
Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.
- Very high initial sharpness.
- Excellent for harder to cut plastics.
- May take more maintenance to keep blades sharp.
Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.
- Very high initial sharpness.
- Excellent for harder to cut plastics.
- May take more maintenance to keep blades sharp.
- Forged blades from high speed steel and hardened.
Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.
- Very high initial sharpness.
- Excellent for harder to cut plastics.
- May take more maintenance to keep blades sharp.
Vessel nippers are very good quality that other quality blades are compared to, but at a relatively high cost with carbide and custom blades available at long lead times. Permanent mechanical stops are pre-set at the factory. Should the blade need resharpening, the mechanical stop must be reground to meet original performance specifications.
- Very high initial sharpness.
- Excellent for harder to cut plastics.
- May take more maintenance to keep blades sharp.
| No. | Part No. | Item Description | Qty Req. | Price | Qty |
| n/a | GSN RA HRS50 |
5349 Vessel Parts Kit for NS50 & NR50
|
0 |
90.21
Each
|
|
| n/a | 852308 |
Piston for NR50 Nipper Body
|
0 |
267.27
Each
|
|
| n/a | GSN BA HR50 |
2600 Vessel Pin & Spring Kit for NR50
|
0 |
58.00
Each
|
|