EMI MEX
216-535-4848
S2K Commerce - Products Dropdown
Actions
- ${title}
S2K Commerce - Shopping Cart
Actions
- ${title}
S2K Commerce - Order Entry
Actions
- ${title}
7403 Modular Sensor Box Secondary Module Two Digital Outputs
The SBM modular Sensor Box is a configurable sensor management system that consists of one or more primary modules (SBMM-E, SBMM) for outputs to the robot or PLC; one or more secondary modules (SBMS-E, SBMS) to receive inputs from the sensors and transfer the signal to the primary module; and one mounting and termination unit (SBMK).
The Secondary Modules receive the signal from the sensor and transmits it to the Primary Module. Up to 20 secondary modules can be linked to one master module.
- 50g
- Connect M8 3-pin sensors (pnp or npn) in series or individually.
- Connect up to 20 secondary modules to one primary module.
- Secondary units can reverse Normally Open (NO) / Normally Closed (NC) sensor logic.
- Primary module has NO & NC signal LED indicators.
- Primary module can send either pnp or npn outputs back to PLC.
- Easy configuration using switches (see below).
- LED sensor status indicators for easy troubleshooting.
- 12-24 Vdc (+/- 10%) power requirement.
- IP40 rating
- End caps allow direct mounting on standard aluminum profile.
- A modular, very compact, scalable solution.
- All modules (primary, secondary, end cap) are 36mm x 34mm x 10mm.
Style & type
The SBM modular Sensor Box is a configurable sensor management system that consists of one or more primary modules (SBMM-E, SBMM) for outputs to the robot or PLC; one or more secondary modules (SBMS-E, SBMS) to receive inputs from the sensors and transfer the signal to the primary module; and one mounting and termination unit (SBMK).
The SBM modular Sensor Box is a configurable sensor management system that consists of one or more primary modules (SBMM-E, SBMM) for outputs to the robot or PLC; one or more secondary modules (SBMS-E, SBMS) to receive inputs from the sensors and transfer the signal to the primary module; and one mounting and termination unit (SBMK).
The SBM modular Sensor Box is a configurable sensor management system that consists of one or more master modules (SBMM-E, SBMM) for outputs to the robot or PLC; one or more slave modules (SBMS-E, SBMS) to receive inputs from the sensors and transfer the signal to the master module; and one mounting and termination unit (SBMK).