S2K Commerce - Products Dropdown

Actions
Loading...

S2K Commerce - Shopping Cart

Actions
Loading...

S2K Commerce - Order Entry

Actions
Loading...
Home  >  EOAT for Cobots  >  Vacuum EOAT Kits  > 8011 KIT-UR-V Vacuum Gripper for Universal Robots

8011 KIT-UR-V Vacuum Gripper for Universal Robots

Item #:KIT UR V 
Available: In Stock

Gimatic Vacuum Kit-UR-V for Universal Robots is a modular and durable vacuum end effector. A lightweight, extruded aluminum frame offers versatility so it can be used for different tasks with minimal setup time. Delivered fully assembled, and easy to adjust!

Gimatic Universal Robot Gripper Kit UR V
698.00
Each
Quantity:

End Of The Arm Tool (EOAT) for vacuum based pick & place operations. The system can be assembled on the UR3, UR5 or UR10 collaborative robots and the included pneumatic actuator and components allow for a direct connection to the robot wrist and to the pneumatic power source. Mount the system with the included mechanical flange to the wrist of the robot and connect the main valve inlet to the pneumatic power source. The system can be connected directly to the M8 plug at the wrist of the robot (no cables along the robot arm). The system can be operated via digital output from the tool interface of the UR robot.

Features:

  • Compatible with UR3, UR5, UR10. User manual and UR CAP included.
  • No special software required.
  • No cables along the robot arm: direct connection to M8 plug connector of the robot.
  • Easy to install and without any configuration (plug & play solution).
  • Embedded vacuum generator, valve and solenoid.
  • UNI EN ISO 12100 Pt. 1 and pt. 2.
  • 306mm x 228mm x 135mm.
  • Delivery with standard HNBR vacuum cups. Contact EMI for different vacuum cups.
8095 Robot Side Electrical Connector for QC75

Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.

Item #:
CMAQC
35.45
Each
8096 EOAT Side Electrical Connector for QC75

Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.

Item #:
CMBQC
83.55
Each
8097 Robot Side QC75 Sensor - Locked Position Only

Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.

Item #:
CSAQC
30.77
Each
8093 Robot Side Quick Changer for Collaborative Robots QC75-A

Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.

Item #:
QC75 A
387.00
Each
8094 EOAT Side Quick Changer for Collaborative Robots QC75-B

Designed for collaborative robots, the QC75 is a manual quick changer that allows for pneumatic and electrical connections to be easily coupled between jobs. Standardize up to 16 electrical contacts and 4 pneumatic lines to have your cobot up and running with minimal downtime.

Item #:
QC75 B
246.00
Each
2645 Positive Negative Pressure Filter for 6mm Tubing

With the same convenience as the conventional vacuum filters (the VFU series), this filter can be used in the positive pressure as well.

Item #:
GSF SFU2 0606
17.09
Each
8021 Vacuum Generator Kit for Collaborative Robots

The Vacuum Generator Kit for Cobots by EMI operates off of a 24Vdc, mono-stable signal and is the ideal solution for vacuum EOAT. With an incorporated teachable vacuum switch, 3D printed housing and anti-slip straps, the VGK is a true plug and play solution for your cobot. Contact our Engineering department if you would like to discuss a custom Vacuum EOAT solution.

Item #:
CRA VGK 1
242.00
Each
8221 OnRobot EOAT Side Quick Changer for Cobots

Built into every OnRobot gripper, the EOAT Side Quick Changer is now available for all EOAT which makes it easy to click into your cobot. With a 20kg payload, this quick changer is a simple way to swap your EOAT in between applications.

Item #:
OR 102014
465.00
Each
8220 OnRobot Robot Side Quick Changer for Cobots

The Quick Changer enables easy and fast tool changing. It is fully collaborative with no sharp edges, which makes it easy and safe for human interaction. The Quick Changer can handle up to a 20kg payload and has a low built-in height and weight.

Item #:
OR 102037
465.00
Each
8222 OnRobot Dual Quick Changer for Cobots

The Dual Quick Changer enables you to use two end-of-arm tools together in a single cycle. With this innovative solution you can use two grippers or vacuum units. Quickly and seamlessly switch between tools to maximize the utilization of your robots.

Item #:
OR 101788
2215.00
Each
8015 Cable Management Kit for Collaborative Robots

Organize and secure pneumatic and electric lines running down your robot arm. Clamps have (4x) channels for tubing and cables up to 6mm diameter. Kit includes 2 clamps, one 12in. strap, and one 18in. strap that fit most Collaborative Robots.

Item #:
CRA CMK 1
35.00
Each
Enter the quantity for each needed part and click add to cart
No. Part No. Item Description Qty Req. Price Qty
n/a MFI A372
7435 Interface Plate for Cobots
1
28.16
Each
n/a V0242H04
2029 Gimatic 1-1/2 Bellows 42mm HNBR Vacuum Cup
4
10.33
Each
Enter the quantity for each needed part and click add to cart