Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_I8001C80M82D40A3IJJSN11012

S2K Commerce - Products Dropdown

Actions
Loading...
Z7_I8001C80MOVHE0AP2AJ17A3084

S2K Commerce - Shopping Cart

Actions
Loading...
Z7_EL9QHKG10GPM20IJGE61AK10S5

S2K Commerce - Order Entry

Actions
Loading...
Sensor
Jaw Style

Mini Body Gimatic PB and >ASS< GRZ-10 Sprue Grippers for EOAT

The Gimatic PB, BB and >ASS< GRZ-10 sprue grippers listed below can be sorted using the drop-downs to the left. Use our live chat if you need additional help! The 10mm diameter mounting post and M5 air port allow these grippers to be used with standard components. Replacement parts are listed on each product page. Catalog pdfs and CAD files can be easily downloaded.

1 - 21 of 21
View:
 
Description
Price
Quantity
89.00
Each
103.00
Each
99.00
Each
99.00
Each
  • 48g
  • Use Gimatic SS–style sensors (see below)
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
  • 3–9mm Applicable Sprue
  • 14.5lbf Force at 25mm Tooling Length. (tooling length is measured at jaw pivot point.)
113.00
Each
145.00
Each
  • 50g
  • Angular, non-self centering
  • Use Gimatic SSY.. or PRO-SSR style magnetic sensors (see below)
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
  • Gripper must be connected to compressed air to get a sprue gripped confirmation.
  • 3–9mm Applicable Sprue
  • 14.5lbf Force at 25mm Tooling Length. (tooling length is measured at jaw pivot point.)
119.00
Each
  • This new part# replaces the GSG-PB-0014S. The gripper remains the same.
  • 48g
  • Normally Open
  • 3–9mm Applicable Sprue
  • 14.5lbf Lbs. Force at tooling length (Measured at jaw pivot point).
103.00
Each
121.00
Each
145.00
Each
  • 48g
  • Fingers individually swivel 5 degrees
  • 3–9mm Applicable Sprue
228.00
Each
129.00
Each
  • 57g
  • HNBR non–marking pads for soft contact
  • 3–9mm Applicable Sprue
132.00
Each
  • 60g
  • Long–lasting metal finger trigger
  • 3–9mm Applicable Sprue
  • Use Gimatic SS–style sensors (see below)
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
148.00
Each
  • 60g
  • Serrated fingers hold small and medium sprues firmly.
  • 3–9mm Applicable Sprue
  • Single-acting with protected opening spring.
  • New Sensor Slot position provides sensing without interfering with the part being gripped.
  • Use Gimatic SSY or SSR sensors recommended (see below)
  • Gripper must be connected to compressed air to get a sprue gripped confirmation.
  • 10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
109.00
Each
  • 74g
  • Jaws made of Aluminum
  • Gripper must be connected to compressed air to get a sprue gripped confirmation.
  • It is recommended that grippers be run individually on their vacuum-monitored airline (high vacuum). Flow restrictions will affect function when splitting up one vacuum line to these grippers.
  • 2.5–9mm Applicable Sprue
134.00
Each
  • 75g
  • Long–lasting metal jaws and trigger for part detection
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
  • 3–9mm Applicable Sprue
  • Use Gimatic SS–style sensors (see below)
158.00
Each
  • 75g
  • 3–9mm Applicable Sprue
  • Use Gimatic SS–style sensors (see below)
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
155.00
Each
  • 60g
  • Note, Unreliable sensing may occur if the part bring gripped is less than 3mm. Correct sensor location in the slot is important for proper operation.
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
  • 3–9mm Applicable Sprue
165.00
Each
  • 57g
  • Note, Unreliable sensing may occur if the part being gripped is less than 3mm. Correct sensor location in the slot is important for proper operation.
  • 3–9mm Applicable Sprue
  • Sensor sold separately, see 'Related Items' below.
  • Gripper must be connected to compressed air to get a sprue gripped confirmation.
  • ∅10mm diameter mounting post with M5 air port allows this gripper to be used with standard mounting and air connection components. Alternate M5 air port on front of gripper can be used.
  • Single-acting with protected opening spring.
  • Higher grip force than other similarly sized sprue grippers.
119.00
Each
  • 62g
  • Aluminum jaws with replaceable HNBR pads
  • Gripper must be connected to compressed air to get a sprue gripped confirmation.
  • It is recommended that grippers be run individually on their vacuum-monitored airline (high vacuum). Flow restrictions will affect function when splitting up one vacuum line to these grippers.
  • 2.5–9mm Applicable Sprue
134.00
Each
1 - 21 of 21
View: